FLIM-FRET Protein-Protein Interaction Assay.

Fluorescence lifetime imaging performed under FRET conditions between two interacting molecules is a sensitive and robust way to quantify intermolecular interactions in cells. The fluorescence lifetime, an inherent property of the fluorophore, remains unaffected by factors such as concentration, laser intensity, and other photophysical artifacts. In the context of FLIM-FRET, the focus lies on measuring the fluorescence lifetime of the donor molecule, which diminishes upon interaction with a neighboring acceptor molecule. In this study, we present a step-by-step experimental protocol for applying FLIM-FRET to investigate protein-protein interactions involving various RAS isoforms and RAS effectors at the live cell's plasma membrane. By utilizing the FRET pair comprising enhanced green fluorescent protein (eGFP) and fluorescent mCherry, we demonstrate that the proximity and possible nanoclustering of eGFP-tagged KRAS4b G12D and mCherry-tagged KRAS4b WT led to a reduction in the donor eGFP's fluorescence lifetime. The donor lifetime of eGFP-tagged KRAS decreases even further when treated with a dimer-inducing small molecule, or in the presence of RAF proteins, suggesting a greater FRET efficiency, and thus less distance, between donor and acceptor.

KRAS4b:RAF-1 Homogenous Time-Resolved Fluorescence Resonance Energy Transfer Assay for Drug Discovery.

Homogenous time-resolved FRET (HTRF) assays have become one of the most popular tools for pharmaceutical drug screening efforts over the last two decades. Large Stokes shifts and long fluorescent lifetimes of lanthanide chelates lead to robust signal to noise, as well as decreased false positive rates compared to traditional assay techniques. In this chapter, we describe an HTRF protein-protein interaction (PPI) assay for the KRAS4b G-domain in the GppNHp-bound state and the RAF-1-RBD currently used for drug screens. Application of this assay contributes to the identification of lead compounds targeting the GTP-bound active state of K-RAS.

A molecular dynamics simulation study of glycine/serine octapeptides labeled with 2,3-diazabicyclo[2.2.2]oct-2-ene fluorophore.

The compound 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO) is a versatile fluorophore widely used in Förster resonance energy transfer (FRET) spectroscopy studies due to its remarkable sensitivity, enabling precise donor-acceptor distance measurements, even for short peptides. Integrating time-resolved and FRET spectroscopies with molecular dynamics simulations provides a robust approach to unravel the structure and dynamics of biopolymers in a solution. This study investigates the structural behavior of three octapeptide variants: Trp-(Gly-Ser)3-Dbo, Trp-(GlyGly)3-Dbo, and Trp-(SerSer)3-Dbo, where Dbo represents the DBO-containing modified aspartic acid, using molecular dynamics simulations. Glycine- and serine-rich amino acid fragments, common in flexible protein regions, play essential roles in functional properties. Results show excellent agreement between end-to-end distances, orientational factors from simulations, and the available experimental and theoretical data, validating the reliability of the GROMOS force field model. The end-to-end distribution, modeled using three Gaussian distributions, reveals a complex shape, confirmed by cluster analysis highlighting a limited number of significant conformations dominating the peptide landscape. All peptides predominantly adopt a disordered state in the solvent, yet exhibit a compact shape, aligning with the model of disordered polypeptide chains in poor solvents. Conformations show marginal dependence on chain composition, with Ser-only chains exhibiting slightly more elongation. This study enhances our understanding of peptide behavior, providing valuable insights into their structural dynamics in solution.

Mercury (II) sensing using a simple turn-on fluorescent graphene oxide based aptasensor in serum and water samples.

A simple, highly sensitive, and selective fluorometric aptasensing platform based on aptamer and graphene oxide (GO) is proposed for the determination of mercury (II) ion (Hg2+). In the designed assay, two aptamer probes, a carboxy-fluorescein (FAM) labeled aptamer (aptamer A) and its complementary (aptamer B) with partial complement containing several mismatches and GO as the quencher were used. In the absence of Hg2+, both A and B aptamers were adsorbed on the surface of GO by π-π-stacking, leading to fluorescence quenching of FAM due to fluorescence resonance energy transfer (FRET). Upon exposure to Hg2+, the A and B aptamer strands bind Hg2+ and form T-Hg2+-T complexes, leading to the formation of a stable double-stranded aptamer. The double-stranded aptamer is detached from the GO surface, resulting in the recovery of FAM fluorescence. The fluorescence intensity (FI) of the developed sensor was correlated with the Hg2+ concentration under optimized experimental conditions in two wide linear ranges, even in the presence of 10 divalent cations as interferences. The linear ranges were obtained from 200.0 to 900.0 fM and 5.0 to 33.0 pM, a limit of detection (LOD) of 106.0 fM, and a limit of quantification (LOQ) of 321.3 fM. The concentration of Hg2+ was determined in five real samples containing three water and two serum samples, using spiking and standard addition methods and the results were compared with the spiked amounts and atomic absorption (AAS) as standard method respectively, with acceptable recoveries. Furthermore, in the standard addition method, to overcome the effects of matrix influence of real samples in quantitative predictions, the excitation-emission matrix (EEM) data for samples was simultaneously analyzed by multivariate curve resolution with alternating least squares (MCR-ALS) as a second-order standard addition method (SOSAM).

Synergistic synthesis of gold nanoflowers as upconversion near-infrared nanoprobe energy acceptor and recognition unit for improved hydrogen sulfide sensing.

A highly sensitive and selective upconversion near-infrared (NIR) fluorescence and colorimetric dual readout hydrogen sulfide (H2S) nanoprobe was constructed based on the excellent NIR fluorescence emission performance of upconversion nanomaterials (UCNPs), the specific recognition effect of synergistically synthesized gold nanoflowers (trypsin-stabled AuNFs (Try-AuNFs)) and the effective NIR fluorescence quenching capability. In this assay, the sensing strategy included three processes. First of all, the synthesized UCNPs can emit 803 nm NIR fluorescence when they were excited by 980 nm excitation light. Secondly, as a result of the principle of fluorescence resonance energy transfer (FRET), Try-AuNFs can effectively quench the NIR fluorescence of UCNPs at 803 nm, which can effectively improve the signal-to-background ratio of nanoprobes, thereby improving the sensitivity of the probes. Thirdly, in the presence of H2S, the Try protective layer on the surface of Try-AuNFs was specifically penetrated, which will subsequently cleave Try-AuNFs via the strong S-Au bond. As such, the NIR fluorescence of UCNPs will be restored, achieving high selectivity and sensitivity detection of H2S. Under optimized conditions, the linear response range of H2S was 0.1-300 µM, and the detection limit was 53 nM. It is worth noting that the Try on the surface of Try-AuNFs via the synergistic effect can increase the steric hindrance of the probe, and this can effectively prevent the interaction between the probe with biothiols (cysteine (Cys), homocysteine (Hcy)) and other natural amino acids (non-thiol-containing) with resultant in the high selectivity regarding the detection of H2S in human serum, which is unlikely to be achieved by AuNFs synthesized by the gold seed method (Se-AuNFs). This work not only provided a new type of UCNPs fluorescence quencher and recognition unit, but also exemplified that the use of the physical properties (steric hindrance) of protein ligands on the surface of nanoflowers can improve the specificity of the probe. This will provide new ideas for the design of other nanoprobes.

Bacterial detection based on Förster resonance energy transfer.

The huge economic loss and threat to human health caused by bacterial infection have attracted the public's concern, and there is an urgent need to relieve and improve the tough problem. Therefore, it is significant to establish a facile, rapid, and sensitive method for bacterial detection considering the shortcomings of existing methods. Förster resonance energy transfer (FRET)-based sensors have exhibited immense potential and applicability for bacterial detection given their high signal-to-noise ratio and high sensitivity. This review focuses on the development of FRET-based fluorescence assays for bacterial detection. We summarize the principle of FRET-based assays, discuss the commonly used recognition molecules and further introduce three frequent construction strategies. Based on the strategies and materials, relevant applications are presented. Moreover, some restrictions of FRET fluorescence sensors and development prospects are discussed. Suitable donor-acceptor pairs and stable recognition molecules are the essential conditions for sensors to play their roles, and there is still some room for development. Besides, applying FRET fluorescence sensors to point-of-care detection is still difficult. Future developments could focus on near-infrared fluorescent dyes and simultaneous detection of multiple analytes.

Integrating magnetic tweezers and single-molecule FRET: A comprehensive approach to studying local and global conformational changes simultaneously.

This chapter presents the integration of magnetic tweezers with single-molecule FRET technology, a significant advancement in the study of nucleic acids and other biological systems. We detail the technical aspects, challenges, and current status of this hybrid technique, which combines the global manipulation and observation capabilities of magnetic tweezers with the local conformational detection of smFRET. This innovative approach enhances our ability to analyze and understand the molecular mechanics of biological systems. The chapter serves as our first formal documentation of this method, offering insights and methodologies developed in our laboratory over the past decade.

FRETpredict: a Python package for FRET efficiency predictions using rotamer libraries.

Förster resonance energy transfer (FRET) is a widely-used and versatile technique for the structural characterization of biomolecules. Here, we introduce FRETpredict, an easy-to-use Python software to predict FRET efficiencies from ensembles of protein conformations. FRETpredict uses a rotamer library approach to describe the FRET probes covalently bound to the protein. The software efficiently and flexibly operates on large conformational ensembles such as those generated by molecular dynamics simulations to facilitate the validation or refinement of molecular models and the interpretation of experimental data. We provide access to rotamer libraries for many commonly used dyes and linkers and describe a general methodology to generate new rotamer libraries for FRET probes. We demonstrate the performance and accuracy of the software for different types of systems: a rigid peptide (polyproline 11), an intrinsically disordered protein (ACTR), and three folded proteins (HiSiaP, SBD2, and MalE). FRETpredict is open source (GPLv3) and is available at github.com/KULL-Centre/FRETpredict and as a Python PyPI package at pypi.org/project/FRETpredict .

Design and Synthesis of Novel Squaraine-Based Fluorescent Probe for Far-Red Detection of Chymotrypsin Enzyme.

Chymotrypsin, a crucial enzyme in human digestion, catalyzes the breakdown of milk proteins, underscoring its significance in both health diagnostics and dairy quality assurance. Addressing the critical need for rapid, cost-effective detection methods, we introduce a groundbreaking approach utilizing far-red technology and HOMO-Förster resonance energy transfer (FRET). Our novel probe, SQ-122 PC, features a unique molecular design that includes a squaraine dye (SQ), a peptide linker, and SQ moieties synthesized through solid-phase peptide synthesis. Demonstrating a remarkable quenching efficiency of 93.75% in a tailored H2O:DMSO (7:3) solvent system, our probe exhibits absorption and emission properties within the far-red spectrum, with an unprecedented detection limit of 0.130 nM. Importantly, our method offers unparalleled selectivity towards chymotrypsin, ensuring robust and accurate enzyme detection. This pioneering work underscores the immense potential of far-red-based homo-FRET systems in enabling the sensitive and specific detection of chymotrypsin enzyme activity. By bridging the gap between cutting-edge technology and biomedical diagnostics, our findings herald a new era of enzyme sensing, promising transformative advancements in disease diagnosis and dairy quality control.

Immunoassay System Based on the Technology of Time-Resolved Fluorescence Resonance Energy Transfer.

To enhance the specificity and sensitivity, cut the cost, and realize joint detection of multiple indicators, an immunoassay system based on the technology of time-resolved fluorescence resonance energy transfer (TR-FRET) was studied. Due to the FRET of the reagent, the donor probe and acceptor probe emitted specific fluorescence to enhance specificity. Long-lifetime specific fluorescence from the acceptor probe was combined with time-resolved technology to enhance sensitivity. A xenon flash lamp and a photomultiplier tube (PMT) were selected as the light source and detector, respectively. A filter-switching mechanism was placed in the light path, so the fluorescence signal from the donor and acceptor was measured alternately. The instrument's design is given, and some specificI parts are described in detail. Key technical specifications of the instrument and procalcitonin (PCT), C-reactive protein (CRP), and interleukin-6(IL-6) were tested, and the test results were presented subsequently. The CV value of the self-designed counting module is better than 0.01%, and the instrument noises for 620 nm and 665 nm are 41.44 and 10.59, respectively. When set at 37 °C, the temperature bias (B) is 0.06 °C, and the temperature fluctuation is 0.10 °C. The CV and bias are between ±3% and 5%, respectively, when pipetting volumes are between 10 µL and 100 µL. Within the concentration range of 0.01 nM to 10 nM, the luminescence values exhibit linear regression correlation coefficients greater than 0.999. For PCT detection, when the concentration ranges from 0.02 ng/mL to 50 ng/mL, the correlation coefficient of linear fitting exceeds 0.999, and the limit of quantification is 0.096 ng/mL. For CRP and IL-6, the detection concentration ranges from 0 ng/mL to 500 ng/mL and 0 ng/mL to 20 ng/mL, respectively, with limits of quantification of 2.70 ng/mL and 2.82 ng/mL, respectively. The experimental results confirm the feasibility of the technical and instrumental solutions.

FRET-Sensing of Multivalent Protein Binding at the Interface of Biomimetic Microparticles Functionalized with Fluorescent Glycolipids.

Cell adhesion is a central process in cellular communication and regulation. Adhesion sites are triggered by specific ligand-receptor interactions inducing the clustering of both partners at the contact point. Investigating cell adhesion using microscopy techniques requires targeted fluorescent particles with a signal sensitive to the clustering of receptors and ligands at the interface. Herein, we report on simple cell or bacterial mimics, based on liquid microparticles made of lipiodol functionalized with custom-designed fluorescent lipids. These lipids are targeted toward lectins or biotin membrane receptors, and the resulting particles can be specifically identified and internalized by cells, as demonstrated by their phagocytosis in primary murine bone marrow-derived macrophages. We also evidence the possibility to sense the binding of a multivalent lectin, concanavalin A, in solution by monitoring the energy transfer between two matching fluorescent lipids on the surface of the particles. We anticipate that these liquid particle-based sensors, which are able to report via Förster resonance energy transfer (FRET) on the movement of ligands on their interface upon protein binding, will provide a useful tool to study receptor binding and cooperation during adhesion processes such as phagocytosis.

Multiplexed imaging in live cells using pulsed interleaved excitation spectral FLIM.

Multiplexed fluorescence detection has become increasingly important in the fields of biosensing and bioimaging. Although a variety of excitation/detection optical designs and fluorescence unmixing schemes have been proposed to allow for multiplexed imaging, rapid and reliable differentiation and quantification of multiple fluorescent species at each imaging pixel is still challenging. Here we present a pulsed interleaved excitation spectral fluorescence lifetime microscopic (PIE-sFLIM) system that can simultaneously image six fluorescent tags in live cells in a single hyperspectral snapshot. Using an alternating pulsed laser excitation scheme at two different wavelengths and a synchronized 16-channel time-resolved spectral detector, our PIE-sFLIM system can effectively excite multiple fluorophores and collect their emission over a broad spectrum for analysis. Combining our system with the advanced live-cell labeling techniques and the lifetime/spectral phasor analysis, our PIE-sFLIM approach can well unmix the fluorescence of six fluorophores acquired in a single measurement, thus improving the imaging speed in live-specimen investigation.

A fluorescent aptasensor for highly sensitive and selective detection of carcinoembryonic antigen based on upconversion nanoparticles and WS2 nanosheets.

A highly sensitive fluorescent aptasensor for carcinoembryonic antigen (CEA) was developed by employing upconversion nanoparticles (UCNPs) as an energy donor and WS2 nanosheets as an energy acceptor, respectively. Polyacrylic acid (PAA) modified NaYF4:Yb/Er UCNPs and an amine modified CEA aptamer were linked together by a covalent bond. Owing to the physical adsorption between WS2 nanosheets and the CEA aptamer, the UCNPs-aptamer was close to WS2 nanosheets, resulting in upconversion fluorescence energy transfer from UCNPs to WS2 nanosheets, and the UCNP fluorescence was quenched. With the introduction of CEA into the UCNPs-aptamer complex system, the aptamer preferentially bound to CEA resulting in a change in spatial conformation which caused UCNPs to depart from WS2 nanosheets. As a result, the energy transfer was inhibited and the fluorescence of UCNPs was observed again, and the degree of fluorescence recovery was linearly related to the concentration of CEA in a range of 0.05-10 ng mL-1 with a limit of detection of 0.008 ng mL-1. Furthermore, the aptasensor based on UCNPs and WS2 nanosheets could be competent for detecting CEA in human serum, which suggests the great application potential of the proposed aptasensor in clinical diagnosis.

Hyperspectral imaging and dynamic region of interest tracking approaches to quantify localized cAMP signals.

Cyclic adenosine monophosphate (cAMP) is a ubiquitous second messenger known to orchestrate a myriad of cellular functions over a wide range of timescales. In the last 20 years, a variety of single-cell sensors have been developed to measure second messenger signals including cAMP, Ca2+, and the balance of kinase and phosphatase activities. These sensors utilize changes in fluorescence emission of an individual fluorophore or Förster resonance energy transfer (FRET) to detect changes in second messenger concentration. cAMP and kinase activity reporter probes have provided powerful tools for the study of localized signals. Studies relying on these and related probes have the potential to further revolutionize our understanding of G protein-coupled receptor signaling systems. Unfortunately, investigators have not been able to take full advantage of the potential of these probes due to the limited signal-to-noise ratio of the probes and the limited ability of standard epifluorescence and confocal microscope systems to simultaneously measure the distributions of multiple signals (e.g. cAMP, Ca2+, and changes in kinase activities) in real time. In this review, we focus on recently implemented strategies to overcome these limitations: hyperspectral imaging and adaptive thresholding approaches to track dynamic regions of interest (ROI). This combination of approaches increases signal-to-noise ratio and contrast, and allows identification of localized signals throughout cells. These in turn lead to the identification and quantification of intracellular signals with higher effective resolution. Hyperspectral imaging and dynamic ROI tracking approaches offer investigators additional tools with which to visualize and quantify multiplexed intracellular signaling systems.

Förster resonance energy transfer within the neomycin aptamer.

Förster resonance energy transfer (FRET) measurements between two dyes is a powerful method to interrogate both structure and dynamics of biopolymers. The intensity of a fluorescence signal in a FRET measurement is dependent on both the distance and the relative orientation of the dyes. The latter can at the same time both complicate the analysis and give more detailed information. Here we present a detailed spectroscopic study of the energy transfer between the rigid FRET labels Çmf (donor) and tCnitro (quencher/acceptor) within the neomycin aptamer N1. The energy transfer originates from multiple emitting states of the donor and occurs on a low picosecond to nanosecond time-scale. To fully characterize the energy transfer, ultrafast transient absorption measurements were performed in conjunction with static fluorescence and time-correlated single photon counting (TCSPC) measurements, showing a clear distance dependence of both signal intensity and lifetime. Using a known NMR structure of the ligand-bound neomycin aptamer, the distance between the two labels was used to estimate κ2 and, therefore, make qualitative statements about the change in orientation after ligand binding with unprecedented temporal and spatial resolution. The advantages and potential applications of absorption-based methods using rigid labels for the characterization of FRET processes are discussed.

Recent advances in FRET probes for mitochondrial imaging and sensing.

Mitochondria, as essential organelles in cells, play a crucial role in cellular growth and apoptosis. Monitoring mitochondria is of great importance, as mitochondrial dysfunction is often considered a hallmark event of cell apoptosis. Traditional fluorescence probes used for mitochondrial imaging and sensing are mostly intensity-based and are susceptible to factors such as concentration, the probe environment, and fluorescence intensity. Probes based on fluorescence resonance energy transfer (FRET) can effectively overcome external interference and achieve high-contrast imaging of mitochondria as well as quantitative monitoring of mitochondrial microenvironments. This review focuses on recent advances in the application of FRET-based probes for mitochondrial structure imaging and microenvironment sensing.

Enhanced detection of acrylamide using a versatile solid-state upconversion sensor through spectral and visual analysis.

Acrylamide (AM) generally forms in high-temperature processes and has been classified as a potential carcinogen. In this study, we put forward a maneuverable solid-state luminescence sensor using polydimethylsiloxane (PDMS) as the matrix coupled with upconversion nanoparticles as the indicator. The core-shell upconversion nanoparticles emitting cyan light were uniformly encapsulated in PDMS. Then it was further modified with complementary DNA of AM aptamer. The nanocrystalline fluorescein isothiocyanate isomer (FITC), coupled with AM aptamer, was attached to the surface of PDMS. FITC effectively quenched the upconversion luminescence through fluorescence resonance energy transfer (FRET). The introduction of AM resulted in preferentially bound to aptamer caused the separation of the quencher and the donor, and led to luminescence recovery. The developed sensor was applied for both spectral and visual monitoring, demonstrating a detection limit (LOD) of 1.00 nM and 1.07 nM, respectively. Importantly, in the actual foodstuffs detection, there is no obvious difference between the results of this study and the standard method, which indicates the developed method has good accuracy. Therefore, this solid-state sensor has the potential for on-site detection using a smartphone device and an Android application.

Single-Molecule FRET at 10 MHz Count Rates.

A bottleneck in many studies utilizing single-molecule Förster resonance energy transfer is the attainable photon count rate, as it determines the temporal resolution of the experiment. As many biologically relevant processes occur on time scales that are hardly accessible with currently achievable photon count rates, there has been considerable effort to find strategies to increase the stability and brightness of fluorescent dyes. Here, we use DNA nanoantennas to drastically increase the achievable photon count rates and observe fast biomolecular dynamics in the small volume between two plasmonic nanoparticles. As a proof of concept, we observe the coupled folding and binding of two intrinsically disordered proteins, which form transient encounter complexes with lifetimes on the order of 100 µs. To test the limits of our approach, we also investigated the hybridization of a short single-stranded DNA to its complementary counterpart, revealing a transition path time of 17 µs at photon count rates of around 10 MHz, which is an order-of-magnitude improvement compared to the state of the art. Concomitantly, the photostability was increased, enabling many seconds long megahertz fluorescence time traces. Due to the modular nature of the DNA origami method, this platform can be adapted to a broad range of biomolecules, providing a promising approach to study previously unobservable ultrafast biophysical processes.

A stable ratiometric fluorescent probe for hypochlorous acid detection and rheumatoid arthritis evaluation.

A ratiometric fluorescent probe (MeO-CNPPV Pdots) based on the principle of fluorescence resonance energy transfer (FRET) was designed for hypochlorous acid (HOCl) and rheumatoid arthritis (RA) detection. The presence of HOCl can block the energy transfer from CNPPV to MeOTPATBT, resulting in a ratio change in the fluorescence of Pdots (I600 nm/I680 nm). This strategy provides a valuable paradigm in early RA evaluation.

Encoding fluorescence intensity with tetrahedron DNA nanostructure based FRET effect for bio-detection.

Biocoding technology constructed by readable tags with distinct signatures is a brand-new bioanalysis method to realize multiplexed identification and bio-information decoding. In this study, a novel fluorescence intensity coding technology termed Tetra-FICT was reported based on tetrahedron DNA nanostructure (TDN) carrier and Forster Resonance Energy Transfer (FRET) effect. By modulating numbers and distances of Cy3 and Cy5 at four vertexes of TDN, different fluorescence intensities of twenty-six samples were produced at ∼565.0 nm (FICy3) and ∼665.0 nm (FICy5) by detecting fluorescence spectra. By developing an error correction mechanism, eleven codes were established based on divided intensity ranges of the final FICy3 together with FICy5 (Final-FICy3&FICy5). These resulting codes were used to construct barcode probes, with three miRNA biomarkers (miRNA-210, miRNA-199a and miRNA-21) as cases for multiplexed bio-assay. The high specificity and sensitivity were also demonstrated for the detection of miRNA-210. Overall, the proposed Tetra-FICT enriched the toolbox of fluorescence coding, which could be applied to multiplexing biomarkers detection.